I recently described the upgrade to the set of wheels on my Cycles Toussaint Vélo Routier v2, a low-trail, 650b bike. Not that you care, but you can read it here: https://mondoblahblah.blogspot.com/2021/07/the-lighten-ing-wheels.html
There are a few other upgrades I've been meaning to make, foremost among them, a new seat post. There was nothing inherently wrong with the Kalloy seatpost that came with the Velo Routier DIY package. It is a simple, classic-looking seatpost that fits this bike perfectly. But there was a minor (hopefully just cosmetic) manufacturing defect that has always bugged me a bit. At the rear of the post there was a tiny "dot" of adhesive foil stuck on for no apparent reason. One day I mindlessly started picking at it, as one might a scab, and once pealed off, it revealed a hole in the post, an obvious defect in from the casting of the aluminum. What have we here?! I exclaimed.
 |
| Kalloy seat post with foil concealing the manufacturing defect |
|
|
 |
Kalloy seat post from Cycles Toussaint
|
Too lazy to make a fuss over a $19 seatpost, and presuming the defect
doesn't constitute a high risk of failure, I left it. If that's the
bike's biggest problem, I'm certainly happy to live with it. And did.
For a long time. But then the binder bolt on the Managing Partner's fancy-schmancy carbon fibre Specialized seatpost snapped off.
Well, as you may imagine, while purchasing a new seat post for her, I couldn't resist the temptation to slip an extra into the ol' René Herse Cycles shopping basket. So it is that the Vélo Routier has come to sport what I think is one of the nicest looking seatposts available, the S65.
 |
Nitto S65 "Crystal Fellow" seatpost
|
 |
Nitto S65 "Crystal Fellow" seatpost - profile view
|
 |
Nitto S65 "Crystal Fellow" seatpost - saddle cut-out view!
|
 |
Nitto S65 "Crystal Fellow" seatpost - box
|
Now I am plum jiggered if I know why it's called "Crystal Fellow". Sounds like a sex toy. But as the box says, it is forged alloy pillar seatpost made in Tokyo, Japan. The Managing Partner's bike is a teeny-tiny "compact" frame, so she needed the 300mm version, while my Vélo Routier shows only the traditional "fist-full of post" so I got the 250mm. It's the same length as the original Kalloy post. So, of course I had to weigh them!
 |
The Kalloy seatpost weighs 261 grams
|
 |
The Nitto S65 "Crystal Fellow" seatpost in 250 saves 10 grams!
|
In addition to being marginally lighter (c'mon, ten grams?!) the Nitto is forged, which I presume means it is stronger than the obviously cast (K)alloy post. I suspect this makes the point about weight: saving that 10 grams cost me about $86 with shipping. So, you know, about $9 per gram. Cheap by bicycle standards but given there was nothing functionally wrong with the original, a bit of an unnecessary extravagance to be sure. Nevertheless, I love Nitto products, want to encourage the company to keep making them, think the "Crystal Fellow" looks just a bit nicer and hey, 10 grams is ten grams, am I right?
